Equipment Introduction:This device is designed as a frame structure with side sheet metal protection. The movement of the upper and lower cold molds is all completed by a servo system. The hot mold is driven by a cylinder, and the electrical and pneumatic connections are connected by quick plug connections, making mold replacement convenient and fast.The upper and lower molds as well as the hot mold of the equipment are driven by a servo system to ensure smooth operation and accuracy requirements.The upper mold is equipped with a safety lock to prevent it from falling.The equipment is equipped with U-shaped positioning pins and quick connectors for easy mold replacement.The equipment is equipped with safety grating protection and three color light alarm prompts.● Transmission part: The transmission part adopts linear guide rails (silver on top) to ensure smooth operation and high accuracy of the equipment.Electric control part: The electrical control part of the equipment adopts Siemens PLC and touch screen control, with Chinese display touch screen.The equipment adopts a temperature module integrated control heating, which can monitor the temperature in real time and ensure temperature stability and accuracy. The thermal model adopts multiple temperature measurement and control points, with a small temperature error range, low energy consumption, and fast temperature sensing speed.Equipment capability: 2 shifts per day, each lasting 11 hours.Equipment weight: 2000KG, equipment color: RAL7035Power supply: 380V AC, three-phase five wire system, 50HZ.● Placement environment: General.Estimated power: 7KW.Gas source: 0.5-0.7Mpa. (Equipped with pressure stability value alarm function)Personnel ratio: 1 person.